CSV file upload with ZIP containers, jQuery, Ajax and PHP 5.4 progress tracking – VI

In the previous articles of this series about an Ajax controlled file upload with PHP progress tracking

CSV file upload with ZIP containers, jQuery, Ajax and PHP 5.4 progress tracking – V
CSV file upload with ZIP containers, jQuery, Ajax and PHP 5.4 progress tracking – IV
CSV file upload with ZIP containers, jQuery, Ajax and PHP 5.4 progress tracking – III
CSV file upload with ZIP containers, jQuery, Ajax and PHP 5.4 progress tracking – II
CSV file upload with ZIP containers, jQuery, Ajax and PHP 5.4 progress tracking – I

we have shown how we can measure and display the progress of a file upload process with a series of Ajax controlled polling jobs and the progress tracking features of PHP > 5.4. At least in our test example this worked perfectly.

However, for practical purposes and especially when our server users deal with large files we must in addition take better care of some limiting PHP parameters on the server. Both a good server admin and a program developer would, of course, try to find out what file sizes are to be expected on a regular basis and adjust the server parameters accordingly. However, you never know what our beloved users may do. What happens if we talked about file sizes of less than 100MB and suddenly a file with 200MB is transferred to the server?

For which limiting PHP parameters on the server may we run into serious trouble?

Due to security considerations the PHP module interaction with incoming data streams is limited by parameters set for the Apache server. The relevant configuration file is e.g. on Opensuse located at


The most important limits (set in different sections of the file) are:

; Maximum amount of time each script may spend parsing request data. It's a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Default Value: -1 (Unlimited)
; Production Value: 60 (60 seconds)
; http://php.net/max-input-time
max_input_time = 200
; Maximum size of POST data that PHP will accept.
; Its value may be 0 to disable the limit. It is ignored if POST data reading
; is disabled through enable_post_data_reading.
; http://php.net/post-max-size
post_max_size = 200M
; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize =150M
; Maximum amount of memory a script may consume (128MB)
; http://php.net/memory-limit
memory_limit = 500M

The description of the first parameter above is somewhat unclear. What is meant by the "time spent on parsing request data"? Is this a part of the (also limited) execution time of the PHP target program of our Ajax transaction? Or is this limit imposed on the time required to read incoming POST data and to fill the $_POST array? If the latter were true a small bandwidth could lead to a violation of the "max_input_time" limit ...

Regarding the second parameter the question turns up, whether this limit is imposed on all transferred POST data including the file data?

The third parameter seems to speak for itself. There is a limit for the size of a file that can be transmitted to the server. However, it is not clear how this parameter affects real world scenarios. Does it stop a transfer already before it starts or only when the limit is reached during the transfer?

Regarding the 4th parameter we may suspect that it becomes important already during the handling (reading, parsing) of the incoming POST data. So, how much of memory (RAM) do we need at the server to handle large files during an upload process?

Warning regarding PHP parameter changes for multi-user situation on real world servers

We were and are discussing a privileged situation in this article series: Only one user uploads exactly one big Zip-container file to a server.

In such a situation it is relatively safe to fiddle around with PHP parameters of the central "php.ini" file (or PHP parameter settings in directory specific files; see the last section of this article). However, as an administrator of a server you should always be aware of the consequences of PHP parameter changes, e.g for memory limits, in a multi-user environment.

In addition you must also take into account that our code examples may be extended towards the case that one user may upload multiple files in parallel in one Ajax transaction.

Remarks on "max_input_time" - you can probably ignore it!

If you look up information about "max_input_time" available on the Internet you may experience that some confusion over the implications of this parameter remains. Especially as PHP's own documentation is a bit contradictory - just compare what is said in the following manual pages:

Therefore, I tested a bit with files up to 1 GByte over slow and fast connections to PHP servers on the Internet. I came to the conclusion that the answer in the following "stackoverflow" discussion
describes the server behavior correctly. This means:

This parameter has no consequences with respect to connection bandwidth and the resulting upload time required for file data: It does not limit the required upload time. Neither does it reduce the amount of allowed maximum execution time of the PHP program triggered at the end of the file transfer process to the server.

"max_input_time" imposes a limit on the time to read/parse the data

  • after they have completely arrived at the server
  • and before the PHP program, which shall work with the data, is started.

This "parsing" time normally is very small and the standard value of 60 secs should be enough under most circumstances. If these findings are true we do not need to care much about this parameter during our file transfer process to the server. A value of 60 secs should work even for large files of 1 GB ore more on modern servers. At least for a server with sufficient resources under average load.

See also:

However, I can imagine circumstances on a server with many users under heavy load, for which this parameter nevertheless needs to be adjusted.

What does the PHP documentation say about the parameters "post_max_size", "upload_max_filesize" and "memory_limit"?

Regarding these parameters we get at least some clear - though disputable - recommendation from the PHP documentation. At

we find the following explanation for "post_max_size":

Sets max size of post data allowed. This setting also affects file upload. To upload large files, this value must be larger than upload_max_filesize. If memory limit is enabled by your configure script, memory_limit also affects file uploading. Generally speaking, memory_limit should be larger than post_max_size. When an integer is used, the value is measured in bytes. Shorthand notation, as described in this FAQ, may also be used. If the size of post data is greater than post_max_size, the $_POST and $_FILES superglobals are empty. This can be tracked in various ways, e.g. by passing the $_GET variable to the script processing the data, i.e. <form action="edit.php?processed=1">, and then checking if $_GET['processed'] is set.

Off topic: For those who find the track-recommendation in the last sentence confusing as it refers to $_GET, see e.g.

You can add parameters to your URL and these parameters will appear in $_GET, but if you decided to use the POST mechanism for data transfer these URL-parameters are included in the POST data mechanism of HTTP.

The recommendation for memory sizing is misleading in case of file uploads!

Following the recommendation quoted above would lead to the following relation for the PHP setup:

memory_limit > post_max_size > ( upload_max_file_size * number of files uploaded in parallel ).

Regarding the right side: My understanding is that "upload_max_file_size" sets a limit for each individual file during an upload process. See

Actually, I find the recommendation for the parameter "memory_limit" very strange. This would mean that somebody who has to deal with an upload file with a size of 2 GByte would have to allow for memory allocation for a single PHP process in the RAM > 2 GByte. Shall we take such a requirement seriously?

My answer is NO ! But, of course, you should always test yourself ....

To me only the last relation on the right side of the relation chain makes sense during an upload process. Of course PHP needs some RAM and during file uploads also buffering requires sufficient server RAM. But several GByte to control a continuous incoming stream of data which shall be saved as a file into a directory (for temporary files) on the server? No way! I did some tests - e.g. limit the memory to 32 MB and successfully upload a 1 GB file. Therefore, I agree completely with the findings in the following article:

See also:


Despite you need RAM for buffering during file uploads it is NOT required to use as much physical RAM as the size of the file you want to upload.

However, it may be wise to have as much RAM as possible if you intend to operate on the file as a whole. This may e.g. become important during phases when a PHP program wants to rewrite file data or read them as fast as possible for whatever purpose. A typical example where you may need sufficient memory is image manipulation.

Nevertheless: Regarding the file transfer process to the server itself the quoted recommendation is in my opinion really misleading. And: Do not forget that a high value for "memory_limit" may lead to server problems in a multi-user situation.

"post_max_size" and "upload_max_filesize" as the main limiting PHP parameters for file uploads

So, only the following condition remains:

post_max_size > upload_max_file_size * number of files uploaded in parallel

But this condition should be taken seriously! There are several things that need to be said about these parameters.

  1. A quick test shows: "post_max_size" imposes a limit on all POST data transferred from client - including file data.
  2. Even for situations in which only one file is uploaded I personally would choose "post_max_size" to be several MBs bigger than "upload_max_filesize". Just to account for overhead.
  3. In case of an upload of multiple files in parallel (i.e. a situation, which we have not studied in this article series) you have to get an idea about the typical size and number of files to be uploaded in parallel. In such a situation you may also want to adjust the parameter

    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20

  4. There may be differences depending on the PHP version of how and when the server reacts to a violation of either of both parameters. For PHP 5.4 it seems that the server does not allow for an upload if either of the parameters is violated by the size of the transferred file(s) - meaning: the upload does not even start. This in turn may lead to different error situations on the server and messages issued by the server - depending on which parameter was violated.
  5. From a developer's perspective it is a bit annoying that the PHP servers reaction to a violation of "upload_max_filesize" is indeed very different from its reaction a violation of "post_max_size". See below.

Server reactions to violations of "post_max_size" and "upload_max_filesize"

We need to discuss a bit the reactions of a PHP server towards a violation of the named parameters before we can decide how to react within our PHP or Javascript programs in the course of an Ajax transaction.

Server reaction to a violation of "upload_max_filesize"
The Apache/PHP server reacts to a violation of "upload_max_filesize" by a clear message in


where 'userfile' corresponds to the "name" attribute of the HTML file input element. A reasonable way how to react to PHP error messages in $_FILES by PHP applications is described in the highest ranked comment of
and also here

Server reaction to a violation of "post_max_size"
What about a violation of "post_max_size"? We can only react reliably to an error via our PHP target programs if an error number or a clear, structured message is provided. Unfortunately, this is not the case when the sum of uploaded data via POST becomes bigger than "post_max_size". When the server detects the violation no content at all is made available in $_POST or $_FILES. So, we have no error-message there a PHP program could react to.

However, we can combine

  • a test for emptiness of the superglobals $POST and $_FILES
  • with some HTTP information from the client, which is saved in $_SERVER,

to react properly in our PHP programs. Such a reaction within our Ajax transactions would naturally include

  • the creation of an error code and an error-message
  • and sending both back within the JSON response to the Javascript client for error control.

When we make a POST request to the server a value of the POST content size is provided by the client and available via the variable



So, for the purpose of error control we will need to add some test code to the "initial" PHP target program "handle_uploaded_init_files.php5" of our Ajax transaction which started the file upload.

Reasonable reactions of our PHP upload and polling programs to a violation of "post_max_size"

Remember that our initial Ajax transaction for upload triggered the server file "handle_uploaded_init_files.php5". Therefore, we should some additional code that investigates the violation of post_max_size" there. This would probably look similar to:

if (
	isset( $_SERVER['REQUEST_METHOD'] )      &&
        ($_SERVER['REQUEST_METHOD'] === 'POST' ) &&
        isset( $_SERVER['CONTENT_LENGTH'] )      &&
        ( empty( $_POST ) )
 ) {
	$max_post_size = ini_get('post_max_size');
	$content_length = $_SERVER['CONTENT_LENGTH'] / 1024 / 1024;
	if ($content_length > $max_post_size ) {
		// Our error treatment ....
		$err_code = ....;
		// create an error message and send it to the Ajax client 
		$err_post_size_msg = ".....";

	// transfer the error code and error message to some named element of the JSON object 
	$ajax_response['err_code'] = $err_code;
	$ajax_response['err_msg'] = $err_post_size_msg;
	$response = json_encode($ajax_response);
	echo $response;

See also:

Note that we cannot assume a certain timing of the reaction of the main program in comparison to our polling jobs. It may happen that we have already started the polling sequence before the error messages from our first Ajax transaction arrive at the client. Therefore, also our polling jobs "check_progress.php5" should be able to react to empty superglobals $_POST and $_FILES :

if ( ( empty( $_POST ) ) && empty ( $_FILES ) ) {
	// Our error treatment ....
	// create an error message and send it to the Ajax client 
	// refer to messages that may turn up in parallel from the main PHP program

The different Javascript client methods which receive their respective Ajaj messages should evaluate the error messages and error numbers from the server, display them and, of course, stop the polling loop in case it is still active. As these are trivial programming steps we do not look deeper into them.

Avoid trouble with limiting PHP parameters before starting the file upload

Although we can react to error situations as described above I think it is better to avoid them. Therefore, I suggest to check file size limits before starting any upload process.

In our special situation with just one big Zip-file to upload we can initiate a file size limit check on the server as soon as we choose the file on the client. This means that the Javascript client must be enabled to react to the file selection action and request some information about the parameters "post_max_size" and "upload_max_filesize" from the server. In addition we need a method to compare the server limits with the size of the chosen file.

Looking into
CSV file upload with ZIP containers, jQuery, Ajax and PHP 5.4 progress control – II
we see that we had defined a proper Javascript Control Object [CtrlO] for the upload form

<form id="form_upload" name="init_file_form"  action="handle_uploaded_init_files.php5" method="POST" enctype="multipart/form-data" >

which - among other things - contains the file selection input tag:

<input type="file" name="init_file" id="inp_upl_file" >

However, we had not assigned any method to the file selection process itself. We are changing this now:

function Ctrl_File_Upl(my_name) {
	this.obj_name = "Obj_" + my_name; 
	// Controls related to GOC and dispatched object addresses
	this.GOC = GOC;
        this.SO_Tbl_Info = null; 
        this.SO_Msg      = null; 
	// ay to keep the selected file handles 
	this.ay_files = new Array(); 
	// msg for 1st Ajax phasefor file upload; 
	this.msg1 = ''; 
	// Timeout for file transfer process
	// this.timeout = 500000; // internet servers  
	this.timeout = 300000; 
	// define selectors (form, divs) 
	this.div_upload_cont_sel 	= "#" + "div_upload_cont";
	this.div_upload_sel 		= "#" + "div_upload";
	this.p_header_upload_sel 	= "#" + "upl_header" + " > span";
	this.form_upload_sel 		= "#" + "form_upload";
	this.input_file_sel 		= "#" + "inp_upl_file";
	this.upl_submit_but 		= "#" + "but_submit_upl";

	this.hinp_upl_tbl_num_sel	= "#" + "hinp_upl_tbl_num";			
	this.hinp_upl_tbl_name_sel	= "#" + "hinp_upl_tbl_name";			
	this.hinp_upl_tbl_snr_sel	= "#" + "hinp_upl_tbl_snr";			
	this.hinp_upl_succ_sel 		= "#" + "hinp_upl_succ";			
	this.hinp_upl_run_type_sel 	= "#" + "hinp_upl_run_type";			
	this.hinp_upl_file_name_sel 	= "#" + "hinp_upl_file_name";			
	this.hinp_upl_file_pipe_sel 	= "#" + "hinp_upl_file_pipe";

	// display the number of extracted and processed files 
	this.num_open_files_sel		= '#' + "num_open_files";
	this.num_extracted_files_sel 	= '#' + "num_extracted_files";
	// Other objects on the web page - progress area 
	this.trf_msg_cont	= '#' + "trf_msg_cont";
	this.trf_msg		= '#' + "trf_msg";
	this.imp_msg_cont	= '#' + "imp_msg_cont";
	this.imp_msg		= '#' + "imp_msg";
	// Status (!) message box (not the right msg box) 
	this.status_div_cont = '#' + "status_div_cont";
	this.id_progr_msg_p  = "#progr_msg"; 
	//progress bar 
	this.id_bar = "#bar"; 
	// right msg block
	this.span_main_msg	= "span_msg"; 
	// variables to control the obligatory check of the file size 
	this.file_size_is_ok = 1; 
	// variables for the Ajax response 
	this.upl_file_succ 	= 0; 
	this.upl_file_name 	= ''; 
	// File associated variables
	this.file_name      = '';
        this.file_size_js   = 0; 	// file size detected by JS
        this.file_size      = '';	// file size detected by server
        this.allowed_file_size = 0;	// allowed file size for uploads on the server  
	// Processing of files     
        this.num_extracted_files = 0;
	this.file_pipeline 	 = 0; 
	this.import_time 	 = 0; 
	this.transfer_time 	 = 0; 
	this.name_succ_dir = ''; 
	this.num_open_files = 1;  

	// transfer time measurement 
	this.date_start = 0;   
	this.date_end = 0; 
	this.ajax_transfer_start = 0; 
	this.ajax_transfer_end 	 = 0; 
	// database import time measurement 
	this.date_data_import_start = 0; 
	this.date_data_import_end = 0; 
	this.data_import_start = 0; 
	this.data_import_end = 0; 
	this.transfer_time	= 0; 
	this.processing_time = 0; 
	this.time_start = 0; 
	// Determine URL for the Form 
	this.url = $(this.form_upload_sel).attr('action'); 
	console.log("Form_Upload_file - url = " + this.url);  				

	// Register methods for event handling 
// Method to start uploading the file  
// -------------------------------------------------------------------
Ctrl_File_Upl.prototype.register_form_events = function() {
		$.proxy(this, 'select_file') 
		$.proxy(this, 'fetch_allowed_file_size') 
		$.proxy(this, 'submit_form') 
		$.proxy(this, 'upl_file') 

The reader recognizes that in contrast to the version of the CtrlO "Ctrl_File_Upl" discussed in previous articles of this series we have added some selector IDs for fields of some other web page areas. But the really important change is an extension of the methods for additional events in "Ctrl_File_Upl.prototype.register_form_events()":

First, we react to a click of the file selection button of the file input field. This only serves the purpose of resetting fields and message areas on the web page. But we react also to the file selection itself by using the change event of the file input field. This triggers a method "fetch_allowed_file_size()" which retrieves the parameter "upload_max_filesize" from the server.

We assume here that the server admin was clever enough to set post_max_size > upload_max_filesize!
Therefore, we only will perform a file size comparison with the value of "upload_max_filesize". If you do not trust your server admin just extend the methods and programs presented below by an additional and separate check for file sizes bigger than "post_max_size". This should be an easy exercise for you.

Now, let us have a look at the new methods of our Javascript CtrlO :

// Method to react to a click on the file selection box 
// ---------------------------------------------------- 
Ctrl_File_Upl.prototype.select_file = function (e) {
	// Call method to reset information and message fields 
	// Note: The following method also deactivates the file submit button !  

// Method to check whether file size is too big   
// ---------------------------------------------
// We check whether the file size is too big 
Ctrl_File_Upl.prototype.fetch_allowed_file_size = function (e) {
	this.file_size_is_ok = 0; 
	// size of the file im MByte determined on the client 
	this.file_size_js = $(this.input_file_sel)[0].files[0].size/1024/1024;
	console.log("actual file size of chosen file = " + this.file_size_js); 	
	// Now trigger an Ajaj transaction 
	var ajax_url = "../func/get_allowed_file_size.php5"; 
	var form_data = ''; 
	// 03.07.2015: we avoid setup as this would be taken as the standard for subsequent Ajax jobs 
                //contentType: "application/x-www-form-urlencoded; charset=ISO-8859-1",
                // context:  Ctrl_Status
                url: ajax_url, 
		context:  this, 
		data: form_data, 
		type: 'POST', 
		dataType: 'json', 
                success: this.response_allowed_file_size, 
                error: this.error_allowed_file_size

// Method for Ajaj error handling during file size check transaction 		
// --------------------------------------------------------------	
Ctrl_File_Upl.prototype.error_allowed_file_size = function(jqxhr, error_type) {
	// Reset the cursor 
	$('body').css('cursor', 'default' ); 

	// Error handling
	console.log("From Ctrl_File_Upl ::  got Ajax error for fetch_allowed_file_size" );  
	var status = jqxhr.status; 
	var status_txt = jqxhr.statusText; 
	console.log("From Ctrl_File_Upl.prototype.error_allowed_file_size() ::  status = " + status );  
	console.log("From Ctrl_File_Upl.prototype.allowed_file_size ::  status_text = " + status_txt ); 
	console.log("From Ctrl_File_Upl.prototype.allowed_file_size ::  error_type = " + error_type ); 
	var msg = "<br>Status: " + status + "  Status text: " + status_txt;    
	this.SO_Msg.show_msg(1, msg); 

// Method for Ajaj rsponse handling after file size check transaction 		
// --------------------------------------------------------------			
Ctrl_File_Upl.prototype.response_allowed_file_size = function (json_response, success_code, jqxhr) {
	// Reset the cursor 
	$('body').css('cursor', 'default' ); 
	var new_msg; 
	var status = jqxhr.status; 
	var status_txt = jqxhr.statusText; 
	console.log("response_allowed_fsize: status = " + status + " , status_text = " + status_txt ); 	

	// The allowed file size on the server
	this.allowed_file_size = json_response['allowed_size'];	
	// parseInt required due to possible MB or GB endings on the server 
	this.allowed_file_size = parseInt(this.allowed_file_size); 
	console.log("allowed file size on server = " + this.allowed_file_size); 	

	// size comparison
	// ----------------
	if ( this.file_size_js > this.allowed_file_size ) {
		this.file_size_is_ok = 0; 
		new_msg = $(this.span_main_msg).html();
		if (new_msg == undefined) {
			new_msg = ""; 
		new_msg += "<br><span style=\"color:#A90000;\">File size too big.</span><br>" +
		"The server allows for files with a size ≤ " +  	
		parseFloat(this.allowed_file_size).toFixed(2) + " MB." + "<br>" + 
		"The size of the chosen file is " + parseFloat(this.file_size_js).toFixed(2) + " MB." + "<br><br>" + 
		"<span style=\"color:#A90000;\">Please choose a different file or reduce the contents !</span>" + "<br><br>" + 
		"If you permanently need a bigger file size limit on the server, please contact your administrator"; 
		this.SO_Msg.show_msg(0, new_msg); 
	// file size within limits 
	// -------------------------
	else {
		this.file_size_is_ok = 1; 
		new_msg = $(this.span_main_msg).html();
		if (new_msg == undefined) {
			new_msg = ""; 
		new_msg += "<br><span style=\"color:#007700;\">File size within server limits.</span><br>" +
		"The server allows for files with a size ≤ " +  parseFloat(this.allowed_file_size).toFixed(2) + " MB." + "<br>" + 
		"The size of the chosen file is " + parseFloat(this.file_size_js).toFixed(2) + " MB." + "<br><br>" + 
		"<span style=\"color:#007700;\">Use the "Start Upload" button to start the file upload!</span>"; 
		this.SO_Msg.show_msg(0, new_msg); 
		// reactivate the submit button 
		// -----------------------------
		$(this.upl_submit_but).on("click", $.proxy(this, 'submit_form') ); 
		$(this.upl_submit_but).css("color", "#990000"); 
// Method to reset some form and information fields on the web page 
// ---------------------------------------------------------------
// We have to reset some form and message fields
Ctrl_File_Upl.prototype.reset_upl_info = function() {
	var msg_progr = ''; 
	var msg_trf = ''; 
	$(this.trf_msg_cont).css('display', 'none');
	$(this.trf_msg).css('color: #666'); 
	var msg_imp = ''; 
	$(this.imp_msg_cont).css('display', 'none'); 
	$(this.imp_msg).css('color: #666'); 
	// Deactivate the "Start Upload" Button 
	// ------------------------------------
	$(this.upl_submit_but).css("color", "#BBB"); 

	// Reset also the main message area  
	// ----------------------------------------------
	this.SO_Msg.show_msg(0, ''); 


This is all pretty straightforward and parts of it are already well known of our previous descriptions for handling the Ajaj interactions with the server by the help of jQuery functionality.

A short description of what happens is:

  • When you click on the button of the file selection input field contents of fields in the message area of our web page and information fields about upload progress are reset as we assume that a new upload will be started.
  • During reset also the form's submit button to start a file upload via Ajax/Ajaj is disabled. Note that we use jQuery's "off('event')"-functionality to to this.
  • As soon as the user selects a specific file we trigger a method which determines and saves the size of the chosen file to a variable and starts an Ajax transaction afterwards. This Ajax interaction calls a target PHP program "get_allowed_file_size.php5" in some directory.
  • The JSON-response of the PHP program is handled by the method

      The main purpose of this method is to make a comparison of the already determined file size with the limit set on the server and issue some warnings or positive messages. If the file size of the chosen file is within the server's limit we reactivate our "submit" button of the upload form. (Note that we use jQuery's "on('event')"-functionality to to this.) Otherwise we keep it inactive - until a more suitable file is chosen by the user.

Thus, by very simple means we prevent any unreasonable upload process already before it can be started by the user.

It remains to show an excerpt of the simple PHP target file:


// start session and output buffer

$file_size_limit = ini_get("upload_max_filesize");
$ajax_response = array();
$ajax_response['allowed_size'] = $file_size_limit; 

$ajax_response['sys_msg'] .= ob_get_contents();

$response = json_encode($ajax_response);
echo $response;


Nothing special to discuss here.

Can we change the limiting parameters during PHP program execution?

No, we can not. But as a developer you may be able to define directory specific settings both for "post_max_size" and "upload_max_filesize" on the server by uploading ".htaccess"-files or ".user.ini"-files to program directories - if this is allowed by the administrator.

The web page php.net/manual/en/ini.core.php shows a column "Changeable" for all important parameters and the respective allowed change mechanisms.
See also:

Different methods of how to change PHP parameters as a user are described here:

However, if you are not a developer but a server admin, preventing users from changing PHP ini-paramters may even be more important for you:

Enough for today. In the next article of this series

CSV file upload with ZIP containers, jQuery, Ajax and PHP 5.4 progress tracking – VII

we shall have a look at possible problems resulting from timeout limits set for our Ajax transactions.