Category Archives: Mathematics

Fun with shear operations and SVD – III – Shearing of circles

Posted on by

This post requires Javascript to display formulas!

In the two previous posts of this series

Fun with shear operations and SVD – I – shear matrices and examples created with Blender
Fun with shear operations and SVD – II – Shearing of rectangles and cubes with Python and Matplotlib

we have clarified some basic properties of shear transformations [SHT]. We got interested in this topic, because Autoencoders can produce latent multivariate normal vector distributions, which in turn result from linear transformations of multivariate standard normal distributions. When we want to analyze such latent vector distributions we should be aware transformations of quadratic forms. An important linear transformation is a shear operation. It combines aspects of scaling with rotations.

The objects we applied SHTs to were so far only squares and cubes. Both (discrete) rotational and plane symmetries of the squares and cubes were broken by SHTs. We also saw that this symmetry breaking could not be explained by a pure scaling operation in another rotated Euclidean Coordinate System [ECS]. But cubes do not have a continuous rotational symmetry. The distances of surface points of a cube to its symmetry center show no isotropy.

However, already in the first post when we superficially worked with Blender we got the impression that the shearing of a sphere seemed to produce a figure with both plane and discrete rotational symmetries – namely ellipsoids, wich appeared to be rotated. We still have to prove this, mathematically. With this post we move a first step in this direction: We will apply a shear operation to a 2D-body with perfect continuous rotational symmetry in all directions, namely a circle. A circle is a special example of a quadratic form (with respect to the vector component values). We center our Euclidean Coordinate System [ECS] at the center of the circle. We know already that this point remains a fix-point of our transformations. As in the previous post I use Python and Matplotlib to produce visual results. But we support our impression also by some simple math.

We first check via plotting that the shear operations move an extremal point of the circle (with respect to the y-coordinate) along a line ymax = const. (Points of other layers for other values yl = const also move along their level-lines.) We then have to find out whether the produced figure really is an ellipse. We do so by mathematically deriving its quadratic form with respect to the coordinates of the transformed points. Afterward, we derive the coordinate values of points with extremal y-values after the shear transformation.

In addition we calculate the position of the points with maximum and minimum distance from the center. I.e., we derive the coordinates of end-points of the main axes of the ellipse. This will enable us to calculate the angle, by which the ellipse is rotated against the x-axis.

The astonishing thing is that our ellipse actually can be created by a pure scaling operation in a rotated ECS. This seems to be in contrast to our insight in previous posts that a shear matrix cannot be diagonalized. But it isn’t … It is just the rotational symmetry of the circle that saves us.

Shearing a circle

We define a circle with radius r = a = 2.

I have indicated the limiting line at the extremal y-values. From the analysis in the last post we expect that a shear operation moves the extremal points along this line.

We now apply a shearing matrix with a x/y-shearing parameter λ = 2.0

\[ M_{sh} \: = \: \begin{pmatrix} 1.0 & 2.0 \\ 0.0 & 1.0\end{pmatrix}
\]

The result is:

As expected! This really looks like an ellipse. Can we proof it?

Transformation of the circle

We use the definition of a shear transformation in 2D (see the first post of this series):

\[ \begin{align}
x_s \: &= \: x \, + \, \lambda * y \\
y_s \: &= \: y
\end{align}
\]

and the definition of the original circle with radius a:

\[ \begin{align}
{x^2 \over \, a^2} \, + \, {y^2 \over \, a^2} \:&=\: 1 \\
\Rightarrow \: {x_s^2 \,-\, λ y_s \over \, a^2} \, + \, {y_s^2 \over \, a^2} \:&=\: 1 \phantom{\Huge{(}}
\end{align}
\]

This actually gives us a quadratic expression in the new coordinate values:

\[
x_s^2 \, + \, \left(\,1\,+\,\lambda^2\, \right)*y_s^2 \:-\: {2 \lambda \over 1\,+\,\lambda^2}*x_s*y_s \:=\: a^2
\]

Thus, we have indeed produced a rotated ellipse! We see this from the fact that the term mixing the xs and the yl coordinates does not vanish.

Position of maximum absolute y-values

We know already that the y-coordinates of the extremal points (in y-direction) are preserved. And we know that these points were located at x = 0, y = a. So, we can calculate the coordinates of the shifted point very easily:

\[ x_s \:=\: 0 \, + \, \lambda * a \:\Rightarrow \: x_s \:=\: \lambda * a \quad (\, = 4\,)
\]

In our case this gives us a position at (4, 2). But for getting some experience with the quadratic form let us determine it differently, namely by rewriting the above quadratic equation and by a subsequent differentiation. Quadratic supplementation gives us:

\[
\left[\, y_s \,- \, {\lambda \over 1\,+\, \lambda^2} \, x_s^2 \, \right]^2 \:=\:
{ 1 \over \left( 1\,+\, \lambda^2 \right)^2} \left[\, a^2\left(\, 1\,+\,\lambda^2 \,\right) \, – \, x_s^2 \,\right],
\]
\[
y_s \:=\: {1 \over 1\,+\, \lambda^2}\, \left( \, \lambda x_s \, \pm \, \left[\, a^2\left(\, 1\,+\,\lambda^2 \,\right) \, – \, x_s^2 \,\right]^{1/2}\, \right)
\]

and

\[
{\partial y_s \over \partial x_s } \:=\: {1 \over 1\,+\, \lambda^2 }\, \left( \, \lambda \, \pm \, {(-x_s) \over \left[\, a^2\left(\, 1\,+\,\lambda^2 \,\right) \, – \, x_s^2 \,\right]^{1/2} } \, \right)
\]

We demand that the derivative becomes zero:

\[
{\partial y_s \over \partial x_s } \:=\: 0 \: \Rightarrow \: x_s^2 \, = \, \lambda^2 \, \left[\, a^2\left(\, 1\,+\,\lambda^2 \,\right) \, – \, x_s^2 \,\right]
\]

Thus – as expected :

\[
x_s^2 \, = \, \lambda^2 \, a^2
\]

Points with maximum radial distance

Let us also find the position of the end-points of the main axes of the ellipse. One method would be to express the ellipse in terms of the coordinates (xs, ys), calculate the squared radial distance rs of a point from the center and set the derivative with respect to xs to zero.

\[
r_s^2 \, = \, x_s^2 \, +\, \left(y_s(x_s)\right)^2, \quad {\partial r_s \over \partial x_s} \,= \, 0 \,.
\]

The “problem” with this approach is that we have to work with a lot of terms with square roots. Sometimes it is easier to just work in the original coordinates and express everything in terms of (x, y):

\[
r_s^2(x) \, = \, \left(x_s(x)\right)^2 \, +\, \left(y_s(x)\right)^2, \quad {\partial r_s(x) \over \partial x} \,= \, 0 \,.
\]

With the basic circle equation and the transformation rules this gives us:

\[
{\partial \over \partial x} \left[x^2 \,+\, 2 \lambda x y \,+\, \lambda^2 y^2 \,+\, y^2 \right] \,= \, 0
\]
\[
\quad {\partial \over \partial x} \left[a^2(1 \,+\ \lambda^2) \,-\, \lambda^2 x^2 + 2 \lambda x \left(a^2\,-\, x^2\right)^{1/2} \right] \,= \, 0
\]

We do not get rid of the square roots. But it is easy to handle. Sorting of terms and getting rid of the denominator leads us to

\[
\left( a^2\,-\ x^2 \right) \, =\, x^2 \,+\, \lambda x \left( a^2 \,-\, x^2 \right)^{1/2}
\]

Adding a quadratic supplementation term gives:

\[
\left( a^2\,-\ x^2 \right) \,+\, {\lambda^2 \over 4} \left( a^2\,-\ x^2 \right) \, =\, \left[ \, x \,+\, {\lambda \over 2 } \left( a^2 \,-\, x^2 \right)^{1/2} \, \right]^2
\]

Taking the square root and reordering results in:

\[
x \,=\, \left( a^2 \,-\, x^2 \right)^{1/2} \, \left[\,\pm\, \left( 1\,+\, {\lambda^2 \over 4} \right) ^{1/2} -\, {\lambda \over 2} \,\right]
\]

Squaring leads to:

\[ \begin{align}
x^2 \,&=\, \left( a^2 \,-\, x^2 \right) \, \left[\,1 \,+\, {1 \over 2} \lambda^2 \,\pm\, {\lambda \over 2} \left(4\,+\, \lambda^2\right)^{1/2} \,\right] \\
&:=\ \xi * \left( a^2 \,-\, x^2 \right)
\end{align}
\]

So, in the end, we get a very simple expression for the x-coordinate of the axes’ end-points:

\[
x \,=\, \pm\, a\, \sqrt{\eta \phantom{\large{(}} }, \quad \mbox{with} \quad \eta \,=\, {\xi \over 1\, +\, \xi }
\]

This gives us all in all 4 solutions as ξ got two values:

\[ \begin{align}
\xi_1 \,&=\, \left[\,1 \,+\, {1 \over 2} \lambda^2 \,-\, {\lambda \over 2} \left(4\,+\, \lambda^2\right)^{1/2} \,\right], \quad \eta_1 \, = \, {\xi_1 \over 1\, +\, \xi_1} \\
\xi_2 \,&=\, \left[\,1 \,+\, {1 \over 2} \lambda^2 \,+\, {\lambda \over 2} \left(4\,+\, \lambda^2\right)^{1/2} \,\right], \quad \eta_2 \, = \, {\xi_2 \over 1 \,+\, \xi_2}
\end{align}
\]

This was to be expected as there are 4 end-points of 2 main axes of an ellipse.

Of course, we need the transformed coordinates. A small calculation shows:

End points of 1st main axis

\[ \begin{align}
x_{s1} \,&=\,\, \: a\, \sqrt{\eta_1 \phantom{\large{(}} } \,+\, \lambda a \, \sqrt{1 \,-\,\eta_1 \phantom{\large{(}} }, \quad
y_{s1} \,=\, \: a\, \sqrt{1 \,-\,\eta_1 \phantom{\large{(}} } \\
x_{s2} \,&=\, – a \, \sqrt{\eta_1 \phantom{\large{(}} } \,-\, \lambda a \, \sqrt{1 \,-\,\eta_1 \phantom{\large{(}} }, \quad
y_{s2} \,=\, – a \, \sqrt{1 \,-\,\eta_1 \phantom{\large{(}} }
\end{align}
\]

End points of 2nd main axis

\[ \begin{align}
x_{s3} \,&=\,\,\: a \, \sqrt{\eta_2 \phantom{\large{(}} } \,-\, \lambda a \, \sqrt{1 \,-\,\eta_2 \phantom{\large{(}} }, \quad
y_{s3} \,=\, – \, a \, \sqrt{1 \,-\,\eta_2 \phantom{\large{(}} } \\
x_{s4} \,&=\, – a \, \sqrt{\eta_2 \phantom{\large{(}} } \,+\, \lambda a \, \sqrt{1 \,-\,\eta_2 \phantom{\large{(}} }, \quad
y_{s4} \,=\,\, \: a \, \sqrt{1 \,-\,\eta_2 \phantom{\large{(}} } \\
\end{align}
\]

These formulas enable us also to calculate the length-values of our ellipse’s main axes (half-diameters!), as and bs :

\[ \begin{align}
a_s \,&=\,\,\: \sqrt{\,x_{s1}^2 \, + \, y_{s1}^2 \phantom{\large{(}} }, \quad \left(\,\approx 4.83 \,\right) \\
b_s \,&=\,\,\: \sqrt{\,x_{s3}^2 \, + \, y_{s3}^2 \phantom{\large{(}} }, \quad \left(\,\approx 0.83\, \right)
\end{align}
\]

For our shearing in x-direction as gives us the longer axis. The rotational angle α between the longer main axis and the x-axis can be calculated via:

\[
\alpha \,=\, \arctan \left( { y_{s1} \over x_{s1} } \right) , \quad \left( \,\approx 22.5 \deg \right)
\]

Plot of main axes, their end-points and of the points with maximum y-value

The coordinate data found above help us to plot the respective points and the axes of the produced ellipse. The diameters’ end-points are plotted in red, the points with extremal y-value in green:

It becomes very clear that the points with maximum y-values are not identical with the end-points of the ellipse’s main symmetry axes. We have to keep this in mind for a discussion of higher dimensional figures and vector distributions as multidimensional spheres, ellipsoids and multivariate normal distributions in later posts.

Rotated ECS to produce the ellipse?

The plot above makes it clear that we could have created the ellipse also by switching to an ECS rotated by the angle α. Followed by a simple scaling in x- and y-direction by the factors as and bs in the rotated ECS. This seems to be a contradiction to a previous statement in this post series, which said that a shear matrix cannot be diagonalized. We saw that in general we cannot find a rotated ECS, in which the shear transformation reduces to pure scaling along the coordinate axes. We assumed from linear algebra that we in general need a first rotation plus a scaling and afterward a second different rotation.

But the reader has already guessed it: For a fully rotation-symmetric, i.e. isotropic body any first rotation does not change the figure’s symmetry with respect to the new coordinate axes. In contrast e.g. to squares or rectangles any rotated coordinate system is as good as any other with respect to the effect of scaling. So, it is just scaling and rotating or vice versa. No second rotation required. We shall in a later post see that this holds in general for isotropically shaped bodies.

Conclusion

Enough for today. We have shown that a shear transformation applied to a circle always produces an ellipse. We were able to derive the vectors to the points with maximum y-values from the parameters of the original circle and of the shear matrix. We saw that due to the circle’s isotropy we could reduce the effect of shearing to a scaling plus one rotation or vice versa. In contrast to what we saw for a cube in the previous post.

In the next post

Fun with shear operations and SVD – IV – Shearing of ellipses

we will apply a shearing transformation to an ellipse.

 

Fun with shear operations and SVD – II – Shearing of rectangles and cubes with Python and Matplotlib

Posted on by

This post requires Javascript to display formulas!

This post series is about shear transformations and related matrices.

In the end we want to better understand the effect of shear operations on “multivariate standard normal distributions” [MSND]. A characteristic property of a MNSD is that its contour hyper-surfaces of constant density are nested spheres. We want to understand the impact of a shear operation on such a random vector distribution.

In the first post of this series
Fun with shear operations and SVD – I – shear matrices and examples created with Blender
we have already had a preliminary look on shear transformations. We have seen that shear transformations are a special class of affine transformations. They are represented by square unipotent, upper (or lower) triangular matrices. The eigenspace is 1-dimensional and the only eigenvalue is 1.

We have also understood that a shear operation can not be reduced to a simple scaling operation with different factors by choosing some special rotated Euclidean coordinate system [ECS], whose origin coincides with volume and symmetry center of the original figure.

Due to its matrix properties which are very different from orthogonal matrices a shear operation is neither a rotation, nor a scaling. Instead we suspect that it might only be decomposed into a combination of a rotation plus a scaling – whatever coordinate system we choose. We still have to prove this in a forthcoming post.

In this post we want to explicitly apply shear matrices to simple 2D- and 3D-figures, namely squares and cubes. We use Python to control the operations and visualize the results with the help of Matplotlib. We will check that the position and orientation of all extremal points in y-direction (2D-case) and z-direction (3D-case) are preserved during shearing. We will depict this by applying the transformations to position-vectors, which point to elements of distinct vertical layers. In 3D I also test the effects of shearing on cubes by just using the 8 corner points of the cube to define 6 faces, which then get transformed.

Afterward we briefly look at the chaining of shear operations and the resulting product of their respective matrices. As some people may think that one could use combinations of shears induced by a mix of upper triagonal and lower triagonal matrices, we investigate the effects of such combinations. We see that such combinations hurt conditions we have already defined for pure shear operations. Even a symmetric matrix, which has the same shear factors in the upper and lower triangular parts of the matrix has a different effect than a real shearing: It distorts a body in the sense of a pure scaling with different factors in potentially all orthogonal directions.

Hint: I omit Python code in this post. If I find the time I will deliver some code snippets at the end of this post series. However, it is really easy to set up your own programs to reproduce the results of my experiments and respective plots with the help of Numpy and Matplotlib.

Before showing results of numerical experiments I first list up some general affine properties and other specific properties of shear transformations.

Affine properties of shear transformations

Important properties of all affine transformations are:

  • Collinearity: points on a line are transformed into points on a line.
  • Parallelism: Parallel lines remain parallel lines. Lines remain lines. Planes are transformed into planes.
  • Preservation of sub-dimensionality: Affine transformations preserve the dimensionality of objects confined to a sub-space of the “affine” space they operate on.
  • Convexity: Convex figures remain convex – i.e. the sign of a curvature radius does not change.
  • Proportionality: Distance ratios on parallel line segments are preserved.

Extremal points on convex surfaces may remain extremal with respect to distances to the origin, but not with respect to a specific coordinate axis (rotation!). Note that the third point holds for convex (hyper-) surfaces – as e.g. that of a sphere or ellipsoid.

Properties of shear transformations and their matrices Msh

I list some properties which I have already discussed in my previous post:

  • Fix point: When we omit a translation it is natural to choose an Euclidean coordinate system [ECS] such, that its origin coincides with the symmetry center of the body to be sheared. This point then remains a fixed point of the transformation.
  • Msh is a unipotent matrix with non-zero-elements only in its upper (or lower) triangular part. The matrix elements on the diagonal are just 1.
  • det(Msh) = 1. A shear transformation is invertible. Its rank is rank(Msh) = n.
  • The only eigenvalue ε is ε = 1. Its multiplicity in the ℝn is n.
  • The eigenspace ESsh has a dimension dim(ESsh) = 1.
  • A single pure shear mediated by a unipotent upper (or lower) matrix can not be reduced to a pure scaling operation in some cleverly chosen, rotated coordinate system.

For reasons of convenience we below again chose an Euclidean coordinate system [ECS] whose origin coincides with the center of volume or the symmetry center of a body which we apply a shear transformation to. This not only guarantees a central fixed point. The structure of the diagonal matrix and the 1s on the diagonal

\[ \begin{align} \pmb{\operatorname{M}}_{sh} \, &= \,
\begin{pmatrix}
1 & m_{12} &\cdots & m_{1n} \\
0 & 1 &\cdots & m_{2n} \\
\vdots &\vdots &\ddots &\vdots \\
0 & 0 &\cdots & 1 \end{pmatrix}, \\
\pmb{v}^{sh} \: &= \: \pmb{\operatorname{M}}_{sh} \circ \pmb{v} \phantom{\Huge{(}}
\end{align}
\]

make it clear that the last component of any affected vector remains constant during a shear transformation:

\[
\begin{align}
\pmb{v} \: &= \: (\, v_1, \, v_2, \,\cdots \, v_n)^T, \\
\pmb{v}^{sh} \: &= \: (\, v_1^{sh}, \, v_2^{sh}, \,\cdots \, v_n^{sh})^T \phantom{\huge{(}} \\
v^{sh}_n \: &= \: 1.0 \, *\, v_n \phantom{\huge{(}}
\end{align}
\]

This is independent of the linear coupling between other components. Therefore, an important feature of a shear operation is:

Extremal points on the surface of a sheared body in the n-th coordinate direction remain extremal and are moved within a hyper-plane orthogonal to the sub-space ℝ1 of the ℝn.

And, more generally:

Points of a sheared body lying in a (n-1)-dimensional sub-space of the ℝn, which are defined by vn = const, are moved within the sub-space, only, during shearing.

In 3D with coordinates (x, y, z) such a sub-space is a hyper-plane defined by z = const.. E.g. for a cube the points of the top face in z-direction are elements who just move within this plane during a shearing-operation. The same holds for any layer of points defined by other values z = const. Actually, the extremal points in z-direction even move along defined straight lines within the plane. In the general case these lines cross the (n-1)-dimensional sub-space.

It is time to take Python to perform some numerical experiments in 2D and 3D – and visualize the above statements. As said, in this post we concentrate on the shearing of squares and cubes. And the behavior of extremal points and other points located on layers with a constant value of the preserved vector component. I admit that squares and cubes are a bit boring, but this post is just a preparational step towards a closer investigation of the the impact of shear operations on statistical vector distributions controlled by Gaussians.

2D: Shearing of a square/rectangle

The figure below shows the end-points of position-vectors, which define data points on a rectangular meshes within a square. All the points reside inside and on the boundary of the square and reflect horizontal layers of the square:

Now we apply a shear matrix with the following elements [[1.0, 1.5], [0.0, 1.0]]. As we only work in two dimensions our matrix just has 4 elements with values ≠ 0. We name the undisturbed vectors of our square vsq. The resulting vectors after the shear operation will be called vsh. I.e.:

\[ \pmb{\operatorname{M}}_{sh} \: = \: \begin{pmatrix} 1.0 & 1.5 \\ 0.0 & 1.0\end{pmatrix}
\]

and

\[ \pmb{v}_{sh} \: = \: \pmb{\operatorname{M}}_{sh} \circ \pmb{v}_{sq}
\]

A plot of all the vsh gives us:

Exactly, what we expected. We directly see the constant shift of layers against each other. And we also see the linearity of the overall effect in the diagonal lines between the new edges. The overall result is a parallelogram.

The points on all the layers were moved along hyper-surfaces with y = const., which in our 2D case are just lines parallel to the x-axis.

Note that the symmetry center at the origin of our figure remained fixed. Point symmetries with respect to the original symmetry center have been preserved. However, original symmetries with respect to the coordinate axes have been broken.

For a rectangle we get analogous, stretched images:

Shear transformation of a cube

The last plots were simple, but visualized the very nature of a shear transformation: Linear differences of (position) vectors between layers. Breaking of plane symmetries for polytopes, while point symmetries are preserved. Let us try to demonstrate something similar in 3D. Once again an illustrative method to do this is to produce multiple planes on different z-levels filled with points on a regular mesh. During plotting we allow for some transparency of these points.

All images show the situation before shearing. You see the flat squares (extending in x- and y-direction) on 4 different z-levels. It can be seen that the dimensions are -15 ≤ vi ≤ 15, for i ∈ {1, 2, 3}. We now apply a shear matrix Msh = [[1.0, 0.7, 0.0], [0.0, 1.0, 0.0], [0.0, 0.0, 1.0]]

\[ \pmb{\operatorname{M}}_{sh} \: = \: \begin{pmatrix} 1.0 & 0.7 & 0.0
\\ 0.0 & 1.0 & 0.0 \\
0.0 & 0.0 & 1.0
\end{pmatrix}
\]

to the position-vectors of our layer points. I.e. we only induce a linear effect of the y-components onto the x-components of our vectors. The result is:

We get a systematic y-dependent change of the x-coordinate values of our points. The z-level of our layer points, however, remain unchanged. Now, we repeat our experiment, but this time we add an additional shear via a linear dependency of x- and y-component values of our vectors on their z-component by

\[ \pmb{\operatorname{M}}_{sh} \: = \: \begin{pmatrix} 1.0 & 0.7 & 1.2
\\ 0.0 & 1.0 & 1.0 \\
0.0 & 0.0 & 1.0
\end{pmatrix}
\]

The shift of the layers against each other in x- and y-direction gets a clearly visible z-dependence:

But, again and of course, all elements of our 4 layers remain on their respective z-level.

Shearing of a cube: Surface layers

An alternative method to visualize the impact of a shear-transformation on a cube with the help of Matplotlib is based on 8 vectors that span the 6 surface elements of the cube. We also make the cube-faces a bit transparent in some plots. The original cube then looks like:

The result for our last shear matrix

\[ \pmb{\operatorname{M}}_{sh} \: = \: \begin{pmatrix} 1.0 & 0.7 & 1.2
\\ 0.0 & 1.0 & 1.0 \\
0.0 & 0.0 & 1.0
\end{pmatrix}
\]

is:

Here wee see again that the z-level of the upper and lower limiting plates of the cube remained constant. They were just moved in x- and y-direction:

Our shear operation has produced a parallelepiped or a spat. This is consistent to the results of Blender experiments depicted in my previous post.

Remarks on a significant deficit of Matplotlib for 3D

A significant problem that one stumbles into with plots like those above is that Matplotlib does not offer us a real 3D engine. Meaning: It often calculates the so called z-order of objects like hyper-planes (or parts of such), curved manifolds, bodies along our fictitious line of visibility wrongly. So, the shading of e.g. transparent and opaque surfaces according to overlaps in 3D along your line of sight is almost always depicted in a wrong way.

For complex bodies this can drive you crazy and makes you wonder if it would be better to learn controlling Blender with Python. For our relatively simple cases I solved the z-order problem by disabling the computed z-order

ax = fig.add_subplot(111, projection=’3d’, computed_zorder=False)

and by manually assigning a z-order-value to each of the cube’s faces.

Still: As soon as we distort a simple body as a cube strongly (see below) you need a really good overview about the order of your surfaces and their colors after rotations. It is worthwhile to make sketches or to create a similar body with Blender first to clearly see, what happens during a sequence of rotations.

Combinations of shear transformations

Shearing transformations can, of course, be chained in an orderly sequence of operations. Let us take a 2D example of two shear matrices with the same shear-parameter:

\[ \begin{align} \pmb{\operatorname{M}}_{sh} \circ \pmb{\operatorname{M}}_{sh} \: &= \:
\begin{pmatrix} 1 & \lambda \\ 0 & 1 \end{pmatrix} \circ
\begin{pmatrix} 1 & \lambda \\ 0 & 1 \end{pmatrix}
\\
&= \: \begin{pmatrix} 1 & 2\lambda \\ 0 & 1 \end{pmatrix} \phantom{\Huge{(}^T}
\end{align}
\]

For different shear parameters we get

\[ \begin{align} \pmb{\operatorname{M1}}_{sh} \circ \pmb{\operatorname{M2}}_{sh} \: &= \:
\begin{pmatrix} 1 & \lambda \\ 0 & 1 \end{pmatrix} \circ
\begin{pmatrix} 1 & \mu \\ 0 & 1 \end{pmatrix}
\\
&= \: \begin{pmatrix} 1 & \lambda \, +\, \mu \\ 0 & 1 \end{pmatrix} \phantom{\Huge{(}^T}
\end{align}
\]

I.e., we just increase the shearing effect by performing two shear operations after another. If we had taken the negative value (μ = – λ) we would just have inverted the shearing. Note:

A chaining of pure shear matrices, which we had defined as upper triangular matrices in the first post, is a symmetric operation with respect to the order of the matrices.

Combination of upper and lower triangular shear matrices?

However, what happens if we combine an unipotent upper triangular shear matrix with a lower triangular matrix with the same shearing coefficient?

\[ \begin{align} \pmb{\operatorname{M}}_{sh} \circ \pmb{\operatorname{M}}_{sh}^T \: &= \:
\begin{pmatrix} 1 & \lambda \\ 0 & 1 \end{pmatrix} \circ
\begin{pmatrix} 1 & 0 \\ \lambda & 1 \end{pmatrix}
\\
&= \: \begin{pmatrix} 1 \,+\, \lambda^2 & \lambda \\ \lambda & 1 \end{pmatrix} \phantom{\Huge{(}^T}
\end{align}
\]

We get a symmetric matrix. This is not surprising, as this always is the case for product of a matrix with its transposed counterpart. But, in addition, a scaling is superimposed. Note also that the combined operation is not symmetric regarding the order of matrix application:

\[ \begin{align} \pmb{\operatorname{M}}_{sh}^T \circ \pmb{\operatorname{M}}_{sh} \: &= \:
\begin{pmatrix} 1 & 0 \\ \lambda & 1 \end{pmatrix} \circ
\begin{pmatrix} 1 & \lambda \\ 0 & 1 \end{pmatrix}
\\
&= \: \begin{pmatrix} 1 & \lambda \\ \lambda & 1 \,+\, \lambda^2 \end{pmatrix} \phantom{\Huge{(}^T}
\end{align}
\]

Let us apply the second variant to our square (see above) for λ = 1.5:

As expected we get a stronger distortion in y-direction. Note also that in contrast to a normal shear operation z-levels of our 4 level-rows were not preserved. Instead the individual levels appear rotated and stretched. Actually, in one of the next posts we will see that our combined matrix can be factorized into a combination of a rotation, then pure scaling, then back-rotation (by the same angle used in the first rotation). But this corresponds to nothing else than a pure scaling in a rotated ECS.

The funny thing with chaining is that using a simple symmetric matrix from the start for λ = 1.5

\[ \pmb{\operatorname{M}}_{symm} \: = \:
\begin{pmatrix} 1 & \lambda \\ \lambda & 1 \end{pmatrix}
\]

would give us a different result than a sequence of MshT * Msh:

Note:

Combining a shear matrix with its transposed is something different than just using a matrix with filling in (transposed) elements in the lower part with the same value as their mirrored elements in the upper triangular part.

By combining upper and lower triangular shear matrices we leave the group of pure shear operations

We could call the application of a symmetric matrix a kind of symmetric shearing. But even with a symmetric matrix we loose the central property of a normal shear operation, namely that the z-levels of body-layers parallel to the x/y-plane are preserved. All in all we get into trouble as soon as we combine original shear matrices and their transposed counterparts. Regarding my definition of a shear matrix in my previous post, we obviously leave the group of shear operations by such a combination. Some reader may regard this as an exaggeration. But it makes sense:
Even the symmetric matrix of the combined operation can be reduced to a pure scaling operation in a rotated coordinate system. And this simply is not shearing.

Just for fun: “Symmetric shearing” applied to a cube

Just for the fun of it, let us apply a symmetric version of a 3D-shearing matrix to our cube:
shear = [[1.0, 0.6, 1.0], [0.6, 1.0, 1.2], [1.0, 1.2, 1.0]]

\[ \pmb{\operatorname{M}}_{symm} \: = \: \begin{pmatrix}
1.0 & 0.6 & 1.0 \\
0.6 & 1.0 & 1.2 \\
1.0 & 1.2 & 1.0
\end{pmatrix}
\]

We expect all layers to be stretched into all coordinate directions now; z-levels of the original layers parallel to the x/y-plane will not be preserved. The normal vector to the transformed layers will be inclined to all axes after the operation.

The following plots were done with intransparent, opaque surfaces. Due to the extreme stretching we would otherwise loose the overview – which is nevertheless difficult. I have kept the order of colors for the cubes side-layers the same as for the unstretched cube: sf_color=[‘yellow’, ‘blue’, ‘red’, ‘green’, ‘magenta’, ‘cyan’]. I first give you some selected perspectives:

The distortion in all directions is obvious. Note that the point-symmetries of all corners with respect to the origin are preserved. The following sequence reflects views from a circle around the vertical axis:













What we learn is that even scaling alone can distort a symmetric body quite a lot.

Conclusion

In this post I have visualized the effect of shear operations on squares and cubes. We saw that working with points on layers and with respective vectors is helpful when we want to demonstrate a central property of real shear operations: One vector component stays as it is. Nevertheless, the symmetry breaking of shearing transformations was clearly visible. We also saw that we should represent shear transformations either by upper or lower triangular matrices, but we should not mix these types of matrices.

As a side effect we have seen that a combination of shear matrix with its transposed induces strong deformations in specific coordinate directions by enhanced scaling factors. Symmetric matrices also lead to relativ strong distortions. We have claimed that these distortions can be explained by pure scaling operations in a rotated coordinate system. A proof has to be delivered yet.

In the next post
Fun with shear operations and SVD – III – Shearing of circles
we take a first step in the direction of shearing multivariate normal vector distributions. We keep it simple and just study the impact of shearing transformations on circles.

 

Fun with shear operations and SVD – I – shear matrices and examples created with Blender

Posted on by

This post requires Javascript to display formulas!

In Machine Learning samples of data vectors often undergo linear transformations. Typical examples are the adaption of vector component values due to the choice of a different shifted and/or rotated coordinate system. Another example is the scaling of vectors. As we have seen in an investigation of Autoencoders they produce multivariate normal distributions which actually are the result of linear transformations of elementary Gaussian distributions. And let us not forget that the transport between layers of neural networks includes linear transformations.

In most cases we can interpret a linear transformations in the ℝn in a geometrical way. Linear transformations are members of a sub-class of affine transformations. Affine transformations in turn can be regarded as a combination of

  • a translation,
  • a scaling in either coordinate direction,
  • a reflection = mirroring operation,
  • a rotation
  • and/or a shear operation.

Translations are trivial. We also understand the effects of rotation and scaling transformations intuitively. A mirror operation can be understand as a kind of inverted scaling with factors -1.

Scaling operations with different scaling factors along different coordinate directions destroy certain rotational symmetries of a 3-dimensional or n-dimensional body. But scaling transformations do not always eliminate symmetries with respect to mirroring planes: If and when we first choose an Euclidean coordinate system whose axes are aligned with symmetry axes of a body with plane symmetries, we are able to keep up at least some of the planar symmetries of the body during scaling operation.

Something that is a bit more difficult to grasp is a shear operation. The reason is that a shear operation destroys one or multiple plane symmetries of an impacted figure – whatever coordinate system we choose. And a shear operation cannot be reduced to a pure scaling operation in some cleverly chosen coordinate system. Neither can it be reduced to a rotation.

This alone is a good reason to have a closer look at this special kind of affine transformation. Another reason is to study what impact a shear operations has on the construction or transformation of a multivariate normal distribution – a topic which is at the center of another post series in this blog.

In this post I first want to discuss what a matrix that controls a shear operation looks like. We discuss some of its mathematical properties. Afterward I want to demonstrate what effects shearing has on two simple objects – a cube and a sphere. These examples will be done with Blender and the available mouse driven shear operations there.

Blender performs the required math in the background – and the examples below only provide visual impressions.

To get a better understanding of the nature of shear operation we, in the second post of this series, switch to Python and apply shear operations via explicit matrix operations onto vectors. We start with 2D-figures. Afterward we turn to 3D-cuboids and find that we produce spats. Another important example (not only with respect to multivariate normal distributions) is then given by the shearing of 3D-spheres: We will find that such an operation always produce ellipsoids. We will check this mathematically.

In a fourth post I want to discuss an important result from linear algebra, namely the so called SVD-decomposition of a linear transformation and its meaning in our context of shear operations. SVD tells us that we can always replace a shear operation by a sequence of simpler operations. We will test this statement for our 2D- and 3D-objects objects. We then also find that the creation of an ellipsoid at any orientation can be done by applying just one shear operation to a unit sphere. Alternatively, we can perform a scaling of a sphere and rotate it once. This will help us to better understand the creation of multivariate normal distributions in a parallel post series.

Shear operations break symmetries of the affected figures

A shear operation Msh introduces an asymmetry into originally symmetric figures. It does so by coupling vector components in a specific way. For reasons of simplicity we reduce our argumentation to the ℝn. We describe objects in this space with the help of position vectors to points inside and on the surface of these objects. We specify the components of position vectors with respect to an Euclidean coordinate system [ECS].

To make things easier we assume that the origin of our ECS coincides with the symmetry center of the body we apply the shear operation to. If the body has plane and point symmetries then the origin is placed at the cutting lines or the cutting point of such planes; i.e., the ECS origin coincides with the symmetry-center of the body and coordinate planes will coincide with some of the symmetry planes. For the cases we look at – spheres, cubes, coboids – the ECS origin thus gets identical with the body’s volume center.

A shear transformation applied to a vector couples at least two of the vector’s components such that a growing value for the coordinate value in the direction of a chosen coordinate axis (e.g. vz) impacts the coordinate value in another coordinate direction (e.g. vx) in a linear way.

Here is an example for the x- and z-components of a 3-dimensional vector (vx, vy, vz)T:

\[ \begin{align}
v_x^{sh} \, &= \, v_x \, + \, \alpha_{xz} * v_z \\ v_y^{sh} \,&=\, v_y \\ v_z^{sh}\,&=\, v_z \end{align}
\]
\[ \pmb{\operatorname{M}}_{sh}: \quad \pmb{v} \,=\, \begin{pmatrix} v_x \\ v_y \\ v_z \end{pmatrix} \:\Rightarrow \:
\pmb{v}_{sh} \,=\, \begin{pmatrix} v_x^{sh} \, = \, v_x \, + \, \alpha_{xz} * v_z \\ v_y^{sh} \,=\, v_y \\ v_z^{sh}\,=\, v_z \end{pmatrix},
\]

With α being some constant. This operation breaks an original plane symmetry of a body with respect to the x-z-plane.

A shear operation preserves the orientation of tangent planes at some surface points

But note also, that a shear operation has another unique property that keeps up a geometrical property of the affected body:

A shear operation preserves the orientation of tangent planes to the body’s surface at some particular points. The most important of these points define extrema on the surface with respect to the component whose value is linearly added in the shearing transformation. The tangent planes there do not only keep up their orientation, but also their position.

In the case defined above we would look a extrema with respect to the z-component:

\[ z \,=\, f(x,\,y), \quad { \partial f \over \partial x } \,=\, { \partial f \over \partial y } \, = \, 0
\]

Actually, we would need a bit of multivariate calculus to derive this statement for general bodies. But the example of a cube helps to grasp the central point: The transformation defined above would keep up the orientation and position of the top and the bottom square surfaces of the cube. See below for respective graphics.

In the case of a general n-dimensional body whose surface is closed, continuous and differentiable at all surface points we will find at least two such points whose tangent planes keep their orientation and position during a shearing operation.

Coupling of more than two vector components – and a restriction

Of course we could have introduced more than just one linear coupling of a selected vector component to other components. In three or n dimensions we can couple 2 components to a third one. In n dimensions we can add up shearing contributions of (n-1)-coordinate values to each of the components. But we introduce a restriction:

To avoid confusion and double shearing effects we always set αzx = 0. And analogously for the other components:

\[ \begin{align} \alpha_{ij} \, &= \, const. \, \neq \, 0, \quad \forall\, i > j \\ \alpha_{ij} \, &= \, 0, \quad \forall\, i < j \end{align} \]

Once again: We avoid a kind of double coupling between the same pair of components. E.g., vx may become impacted by vz, but vz then shall not get impacted by vx at the same time.

Obviously, this is a an asymmetric policy in the formal handling of vector component coupling. But, it has geometrical consequences (see below). Of course, we follow this asymmetric policy also for other pairs of vector components and respective coupling parameters. This gives us a number of n*(n – 1)/2 potential constant shearing parameters.

A first example produced with the help of Blender

To get a visual impression of what shearing does to a body with some symmetries, let us look at a simple example: a cube.

Regarding the first image we define that the x-coordinate direction goes from the left to the right, the y-direction from the front to the back and the z-direction from the bottom vertically upwards. The last image from the top shows that the x- and y-side-length of our cube are equal. Among other symmetries, a cube and also cuboids obviously have a mirror symmetry with respect to planes parallel to the x/y-plane, the y/z-plane and the x/z-plane through their centers of volume.

Now let us apply two shear operations which couple the x/z-coordinates and the y/z-coordinates. Then we get something like the following:

The first two image show the sheared object from the front, but with the camera moved to different heights. We see that the cube was sheared in two directions – in the x- and in the y-direction. The z-values of the upper and lower surfaces remain constant during the operation. As a result the object gets inclined in two directions: We get a spat (or parallelepiped) as the result of applying a shear operation to a cube or cuboid.

The last image shows the object from exactly the same top position as before the shearing. We see that the original symmetry is destroyed with respect to all 3 orthogonal planes (parallel to coordinate planes) through the center of volume of our object.

Also all of the following objects are the results of simple shearing operations. While this clear for the parallelepiped (derived from a cuboid) and the inclined cylinder (derived from a straight cylinder), it is not directly obvious for the ellipsoid which in the depicted case actually is the result of a shearing applied to a sphere (with x being impacted by y and z). In all cases rotations and translations have been applied in addition to arrange the scene.

We get the impression that some simple geometric shapes like a spat or an ellipsoid could be the direct result of one or more shearing operations applied to originally simple objects with multiple symmetries – as cubes and spheres.

Shear transformations are mathematically done by unipotent upper triangular matrices

Let us return to a more mathematical description of a shear operation. As any other linear operation applied to vectors of the ℝn we can represent a shear operation by a matrix. We just have to express the linear coupling between two vector components by a suitable arrangement of our shear-constants as matrix-elements. By experimenting a bit we find that a square matrix which only has non-zero elements on its diagonal and in its upper right triangular part does the job. We speak of an “upper triangular matrix“:

\[ \pmb{\operatorname{M}} \, = \,
\begin{pmatrix}
m_{11} & m_{12} &\cdots & m_{1n} \\
0 & m_{22} &\cdots & m_{2n} \\
\vdots &\vdots &\ddots &\vdots \\
0 & 0 &\cdots & m_{33} \end{pmatrix}
\]

That such a matrix mixes vector components in the intended way follows directly from the definition of standard matrix multiplications. (Note: In Python/Numpy we talk about “matmul”-operations.)

Note that not all elements in the upper triangular part (aside the diagonal) are required to be different from zero. But at least one should be ≠ 0.

Not a full and neither a symmetric matrix

Now we come back to a point introduced already above: In principle we could allow for a coupling of two selected vector components in both logically possible ways. E.g., when we have an impact of the z- onto the x-component, why not also allow for an analogous impact of x- onto z at the same time? Maybe with a different linear factor?

Well, we then would get a full linear operation with possibly all n**2 elements having different values or we would get a symmetric matrices. A full generalization is not our objective. We want a special sub-case of a linear transformation. But why not allow for a symmetric matrix?

The reason for this will become clear when we discuss the decomposition and factorization of shear matrices in future posts. For the time being the following hint may help: The complexity of a linear operation can be measured by the minimum number of elementary operations required in a well chosen ECS. Can we find a coordinate system where the transformation reduces to just one elementary operation (translation, scaling, reflection, rotation)?

For a shearing transformation this would have to be a scaling operation as this kind of operation can at least potentially break rotational and planar symmetries.

Now we remember a result of linear algebra: Any symmetric matrix corresponds to an operation for wich we always can find a rotated ECS (at the center of an originally highly symmetric figure) in which the transformation of the figure reduces to a pure scaling operation.

For a shear operation we even want to exclude this kind of reduction: We shall not be able to find a ECS in which the operation just becomes a scaling. (A shearing shall in any coordinate system at least require a scaling and a rotation.) How can we achieve this? Well, we must not even allow for a symmetric matrix. For bodies which show original symmetries with respect to planes through its center this means that a shear operation destroys at least some of its planar symmetries whatever coordinate system we choose. Despite the fact that a shear operation can be inverted (see below)!

So, our elimination of some rotational and at least one planar symmetry in an originally highly symmetric body is reflected by the triangular form of the matrix. We avoid a 2-fold coupling between two selected coordinates at the same time. So when we have a matrix element mi,j, with j > i, we always set the corresponding element to zero: mj,i = 0.

This restricts the distortions we are going to get. Some surface elements are going to remain congruent and some point symmetries are kept up.

Why did we not use a lower triangular matrix?

Well, this is just a convention. Actually, the transposed matrix of an upper triangular one would also do the job – so we could also take matrices with non-zero elements only in the lower left triangle. But, for convenience, we will stick to matrices with non-zero elements in the upper right triangular part.

What about the diagonal elements of a shear matrix?

First of all note that not all elements on the diagonal of the matrix Msh should become zero – because then we would eliminate our original figure totally. But for a shear operation we do not want any of the vector components to disappear! In addition: As non-zero elements in the diagonal would reflect a simple scaling we do request that all of the diagonal matrix elements should be equal to 1 for a pure shear operation:

\[ \pmb{\operatorname{M}}_{sh} \, = \,
\begin{pmatrix}
1 & m_{12} &\cdots & m_{1n}(\ne0) \\
0 & 1 &\cdots & m_{2n} \\
\vdots &\vdots &\ddots &\vdots \\
0 & 0 &\cdots & 1 \end{pmatrix}
\]

With at least some of the mi,j(>i) ≠ 0. We then speak of a unipotent or unitriangular matrix.

An example for 4 dimensions would be:

\[ \pmb{\operatorname{M}}_{sh}^{4D} \: = \: \begin{pmatrix}
1.0 & 0 & 1.5 & 0.8 \\
0 & 1.0 & 0.2 & 0 \\
0 & 0 & 1.0 & 2.0 \\
0 & 0 & 0 & 1.0
\end{pmatrix}
\]

As the diagonal is fixed by elements mi,i(>i) = 1, we have reduced the number of free and independent (off-diagonal) parameters Nindsh(>i) of a pure shear matrix Msh from n**2 to:

\[ N^{ind}_{sh}(\pmb{\operatorname{M}}_{sh}) :\: = \: n\,*\, (n\,-\,1)/2
\]

So, in 2 dimensions instead of 4 parameters we set the diagonal elements to 1 and choose just 1 free off-diagonal parameter. In 3 dimensions we only have to set 3 instead of 6 off-diagonal parameters.

Basic properties of a shear matrix

A quick calculation shows: The determinant of a shear matrix is directly given by the product of its diagonal elements, and thus we have:

\[ \operatorname{det} \left(\pmb{\operatorname{M}}_{sh}\right) : = \: 1
\]

Therefore, a shear matrix is always invertible. This means its effects can be reverted – also in geometrical terms. The matrix also has full rank r = n.

The eigenspace and the eigenvalue(s) of a shear matrix Msh are also interesting. We can use a property of triangular matrices to get the eigenvalue(s):

The diagonal elements of a triangular matrix are its eigenvalues.

This in turn can be understood from analyzing the characteristic polynomial det(M – λI) = 0.

Thus: The one and only eigenvalue ev of Msh is 1.

\[ \pmb{ev}_{\operatorname{M}_{sh}} \, = \, 1
\]

The eigenvalues algebraic multiplicity in the characteristic polynom is n This does not yet tell us much about the geometrical multiplicity, i.e. the dimension of the eigenspace.

But all the n eigenvalues share the same eigenspace ES. ES is the kernel of the matrix (A – λI). Therefore, we can derive the eigenspace’s dimension by the dimension formula for this particular matri:

\[ \operatorname{dim}_{ES} \, = \, n \,- \, \operatorname{rank}\left(\pmb{\operatorname{M}}_{sh} \, – \, \lambda*\pmb{\operatorname{I}} \right) \,=\, n \, – \, (n\,-\,1) \,=\, 1
\]

as the rank of the combined matrix on the right side is (n – 1).

You also see this understand this by looking at the 4-dim example matrix given above:
When you write down the equations you will find that only 1 variable can be chosen freely. So the kernel of the matrix (A – λI) is only 1-dimensional. Logically and geometrically, this is clear as any other coordinate value (≠ 0) beyond the first one mixes in contributions.

It is easy to prove that the eigenspace ES can be based upon the eigenvector e1.

\[ \pmb{e}_1 \, = \, \left( \, 1,\, 0,\, \cdots,\,0\right)^T, \: \\ \mbox{with}\, (n\,-\, 1) \, \mbox{ zero components}
\]

A shear matrix cannot be diagonalized

Can Msh be diagonalized? Answer: No! From linear algebra we know that this would require n linearly independent eigenvectors. But we have just one! So:

\[ \pmb{\operatorname{M}}_{sh} : \neq \: \pmb{\operatorname{Q}} \circ \pmb{\operatorname{D}}_{sh} \circ \pmb{\operatorname{Q}^T}
\]

Think a bit about the consequences:
An operation like that on the right side of the un-equation above would correspond to the representation of our shear matrix in a different (rotated) coordinate system. A diagonalization corresponds to an eigendecomposition; in geometrical terms a diagonal matrix represents a pure scaling operation. But, obviously, such a description of our shear operation in some (cleverly) selected ECS is not possible:

We cannot find a (translated and rotated) ECS in which a shear operation reduces to a scaling transformation. In any chosen (rotated) ECS there is always an additional second rotation involved which we cannot simply invert or get rid off!

We shall see this in more detail when we discuss decompositions. We simply cannot get rid of the fundamental asymmetry we have build into Msh by not allowing non-zero elements in the lower triangular part of the matrix! No change to a whatever selected coordinate system will help.

So, a shear operation really is a special symmetry breaking operation which cannot be reduced to just one elementary operation. In any ECS it requires at least a rotation and a scaling!

Summary:

A pure shear operation is introduced by some off-diagonal and non-zero element in the upper right triangular part of a unipotent matrix. All off-diagonal elements in the lower left triangular part are set to zero.

More illustrations from Blender

First some images for a cuboid that was more extremely deformed by shearing in x- and y-direction than the first one:

Now we come to an interesting example: We apply shearing in x- and y-direction to a sphere. We get something whose shape looks much more regular than that of a cuboid. We pick a unit sphere and apply to shearing operations in x- and y-direction:

The first image shows the original sphere from some point of view. The second image was taken from the same perspective, but now after the shearing. The resulting figure looks very regular – and it seems to have plane symmetries.

Another example with a bit of different lighting gives us:

Actually, we get an ellipsoid. We clearly can identify the two points which have a maximum absolute z-values whose tangent planes did not change tier orientation.

Ellipsoids (in 3D) are figures with 3 main axes and planar symmetries. The original fully rotational symmetry (first image of the series above) is obviously broken. However, we seem to have saved at least some planar symmetries. Hmmm …. Just when we thought we had understood that a shearing operation breaks original planar symmetries we have in our new example case kept some.

Why is this? What is so special about the shearing of spheres? Keep this question in mind.

Conclusion

Shearing transformations are a special class of linear and thus transformations. Shearing obviously can break some plane symmetries of originally highly symmetric bodies – as cubes. In contrast to other elementary affine operations no coordinate system can be found where the number of operations to reproduce the effects of a shearing can be reduced to one. In particular it is not possible to find an Euclidean coordinate system where it is just reduced to a (symmetry breaking) scaling with different factors in different coordinate directions.

Blender offers a simple graphical method to apply shearing to simple geometrical bodies. This allowed us to get an impression of the effects on cubes and spheres. Something that was a bit astonishing was the shearing effect on a unit spheres. It just created ellipsoids – again highly symmetric bodies WITH planar symmetries.

In the next post of this series
Fun with shear operations and SVD – II – Shearing of rectangles and cubes with Python and Matplotlib
we will look closer at shearing operation with the help of Python and matplotlib.